RO Pure Water Treatment is the most precise membrane liquid separation technology. The operating pressure is applied on the side of the inlet water and the concentrated solution to overcome the natural osmotic pressure.
When the operating pressure higher than the natural osmotic pressure is dropped on the side of the concentrated solution water molecules naturally permeate the flow The direction will be reversed, and the water molecules in the influent concentrated solution pass through the reverse osmosis membrane to become the purified water om the dilute solution side Reverse osmosis suitable equipment can block all soluble salts and organic substances with a molecular weight greater than 100. but allow water molecules to pass through, The salt rejection rate of reverse osmosis composite membranes is generally greater than 98%.
RO Pure Water Behandling
Most of our projects use DOW Filmtec, Toray, Vontron, Hydranautics, LG brands. They are well-known brands in the water treatment industry.
The reverse osmosis membrane is the core element to realize reverse osmosis, and it is an artificial semipermeable membrane with certain characteristics made by simulating biological semipermeable membrane. Generally made of polymer materials. Such as cellulose acetate film, aromatic polyhydrazide film, aromatic polyamide film. The diameter of the surface pores is generally between 0.5 and 10 nm, and the permeability is related to the chemical structure of the membrane itself. Some polymer materials have good repellency to salt, but the permeation speed of water is not good. The chemical structure of some polymer materials has more hydrophilic groups, so the permeation speed of water is relatively fast. Therefore, a satisfactory reverse osmosis membrane should have an appropriate amount of permeation or salt rejection.
Additionally, commercial RO water treatment systems can incorporate chemicals such as anti-scaling (scaling inhibitors), anti-fouling, pH adjustment, sterilization and disinfection chemicals in the pre- or post-treatment. We keep a close eye on the water treatment industry and add new water technologies to our reverse osmosis water plants.
When checking the customer's water quality analysis report, sometimes due to scaling and scaling problems, we can use the CIP (cleaning-in-place) system to clean the membrane in the membrane shell to make the membrane longer life. It is a new type of water treatment technology most used in the water treatment industry.
Elektrisk kraft av kommersielle RO-vannbehandlingssystemer
For kommersiell vannrensing anlegget trenger 220-380V / 50Hz / 60Hz. For større kapasitet, spesielt for industrielt omvendt osmosesystem, på grunn av høytrykkspumpe, trenger den 380V 50/60Hz. Når det gjelder din kommersielle omvendte osmose vannfiltreringsmaskindesign, vil vi sjekke strømforsyningen din og bestemme fikse strøm til deg. Vi har også noen energibesparende metoder for å redusere elektriske kostnader, Chunke nye vannbehandlingsteknologier hjelper deg med å redusere de største kostnadene for å kjøre systemet.
Før du kjøper kommersielt vannrensingssystem, bør du vite:
1. Produksjonskapasitet for rentvann (l / dag, l / time, GPD).
2. Matevann TDS og råvannsanalyserapport (forhindre begroings- og skaleringsproblem)
3. Jern og mangan må fjernes før råvann kommer inn i omvendt osmose vannfiltreringsmembran
4. TSS (Total Suspended Solid) må fjerne før kommersielt vannrensingssystem membran.
5. SDI (Silt Density Index) må være mindre enn 3
6. Må være sikker på at vannkilden ikke har olje og fett
7. Klor må fjernes før kommersielt vannbehandlingssystem
8. Tilgjengelig elektrisk strømspenning og fase
9. Oppsett av sted for kommersielt ro omvendt osmose systemDriftsspesifikasjon for kommersielle RO vannbehandlingssystemer
Matevann TDS: 0 - 1000 ppm
|
Hardhet over 18 ppm Trenger antiscalant dosering
|
Turbiditet må være
Fjernet
|
Matevannstemperatur: 42 °C
|
Operere med høyere TDS-resultater lavere
Bedring
|
H2S må være
Fjernet
|
pH-toleranse: 3-11
|
Jerninnhold: 0,05 ppm
|
|
Matevanntrykk: 1,5 til 6 bar
|
Silica Toleranse: 60 ppm
|
|
Contact us to learn more about our industrial reverse osmosis systems and commercial RO water plants. Our sales team and technical team will be happy to share new water treatment technologies for your project.